Swastik

Swastik Synergy Engineering (SSE) we manufacture various types of Fire Fighting Appliances and safety products. SSE team of professionals consists of highly qualified professionals from fields of Engineering, Science, Management and Commerce.

Factory & Infrastructure:

SSE total manufacturing and warehousing facility admeasures 1.6 Acers

It consists of all the necessary plant and machinery required for manufacturing Fire Extinguishers from Deep Drawing stage to complete assembly of Fire Extinguisher. The factory is also equipped to carry out Performance Test and Fire Test of various fire extinguishers and fixed system manufactured. It also consists of a Laboratory equipped with all necessary test equipment’s and is operated by highly qualified Quality Control Staff. Risk of fire hazard proves to be very dangerous in the modern commercial kitchen. Fire in kitchen is generally due to burning of oil. However oil & fats burn at relatively high temperature and hence once they catch fire, extinguishing them is very difficult. Open flames, red hot cooking surfaces and a heavily grease- laden environment help the kitchen fire to spread quickly and have proven to be very difficult to extinguish. With the aim to protect modern kitchens from such risks we have developed SYNERGY KITCHEN FIRE SUPPRESSION SYSTEM. The system is developed according to the NFPA & UL Standards. It can be widely used in the Kitchens of the Hotels, Institutes, Restaurants, and Schools etc.

System Design
  • The Kitchen Fire Suppression System is designed to provide fire protection in hoods and ducts of cooking appliances for restaurants.
  • The basic system consists of wet agent tank enclosed in a cylinder mounting box, Temperature Sensors, Heat sensing cable, Control panel, Nozzles, piping, & water storage tank (optional) etc.
  • The system provides automatic actuation with an option of being actuated manually through a remote manual pull station.
  • The system is also capable of shutting down other appliances on system actuation, if required.
  • Additional equipment such as remote manual pull station, mechanical and electrical gas valves, pressure switches, electrical switches & accessories such as alarms, warning lights, etc. can be integrated with the system.
  • As the fire is detected Control Panel activates the wet agent tank and wet agent is discharged extinguishing the fire.
  • Single and Multi Wet Agent tank system is available.
System Operation
  • The SKFS System suppresses fire by spraying the SYNERGY Low pH Liquid Fire Suppressant on the plenum area, the filters, cooking surfaces, and the exhaust duct system with a predetermined flow rate.
  • When the liquid agent is discharged onto a cooking appliance fire, it cools the grease surface, and reacts with the hot grease (saponification) forming a layer of soap-like foam on the surface of the fat.
  • This layer acts as insulation between the hot grease and the atmosphere, thus helping to prevent the escape of combustible vapors.
  • The system is designed as a hybrid (agent and water) system.

    • Upon actuation, agent is discharged onto the hazard area. Immediately following discharge, the waterline system is activated and it allows water to flow onto the same hazard areas, continually refurbishing the foam blanket and cooling the hot appliance to prevent re-ignition.

Control Panel
  • Digital Temperature display
  • Battery Back-up
  • System Low Pressure Indicator
  • Emergency Activation Switch

    • Automatically Shuts off the Gas Supply Valve on activation

    Turn off other devices as required.

    Battery Charging Indicator

    Fault Indicator

    Pre Audio Visual alarm before Activation

2023 © BARQ Group | Copyright are reserved | powered by OrangeQatar